Epoxy Finish Gi Conduit Powder Coated PVC

Basic Info

Product Description

GI Conduit Pipe BS4568 BS31 BSI Certified

BSI CERTIFED AND CAN GIVE TEST REPORT

General:

BS4568 Part 1:1970 BS EN BS EN 61386-1:1994 & BS EN 61386,Steel BS4568 G.I. conduit is manufactured from a mild steel tube,It has an accurate circular cross section,a uniformand wall thickness,a defect free interior surface.The finished threads,BS4568,conforms to the,Each length of the conduit have the size,logo,product name print or engraved to make as installation instructions

Size & details:

Features:

Q195 steel coil for mechanical strength,well controled internal beads(all can remove as seamless) essential for wire pulling and resistant to snagging The conduits are come with a coupler screwed on one end and a protective plastic cap at the other ends to prevent damage.Rigorous quality control procedures to ensure process and product consistency

• Galvanized steel construction provides shielding from magnetic fields and protection from impact damage and crushing
• Electroplated couplings prevent zinc build-up
• Designed for use with threaded connections
• Brand Name: RANLIC
• Length : 3.75 meters.
• Material : Galvanized steel-class 3 / Hot-dipped Galvanized-class 4
• Size: 3/4" , 1" , 1-1/4"
• Thickness: 1.3mm---1.6mm or according to customer's requirement

General:

The EMT/IMC/RIGID conduit is manufactured from a mild steel tube,It has an accurate circular cross section,a uniformand wall thickness,a defect free interior surface.Highly required customers also can remove the inside welded seam to 100% protection with the electrical wire(only for the hot dip galvanized finish conduit)

RanLic Steel Electrical Metallic Tubing is manufactured in accordance with lastest edition of U.S. standard,For EMT/IMC/RIGID and its associated tubular fittings are produced in nominal trade size from 1/2" to 4",is produced in standard lengths of 10 feet(3.05 m).

Application:

The conduit provides top mechanical strength and protection for electrical cabling.Inside welded bead controlled to a minimum for easier wire pulling(for pre-galvanized finished conduit).For electrical wiring For industrial & commercial installation and giving high load bearing capacities. It provides excellent mechanical protection for the conductors while reducing Electro-Magnetic Field exposure and shielding.the hot-dip galvanized conduit pipe also can be used in the rough condition such as tunnel and underground.

Features:

Pre-Galvanized and hot dip galvanized with a minimum coating designation of G180,Q195,rolled steel coil,Packed in bare bundles,IMC/RGD fitted with zinc-coated coupler on one end and the unsocket one ends protected with plastic caps. EMT pipe do not come with plastic caps unless ordered,conduit pipe caps also come different colore optioned by customer

Each lot of conduit pipe before shipping out all will be testing by the cupric sulfate 200 hours testing to assure the inside and outside galvanized is in perfect condition.Rigorous quality control procedures to ensure process and product consistency

Hot Dipped Galvanised to Class 4

AXWILL Class 4 conduit is Hot Dipped Galvanised, a process where steel products are coated with zinc by immersing them in a molten zinc bath at a temperature of approximately 450 °C. Trace elements of alloying metals such as lead, aluminium and nickel are included to improve fluidity and reduce dross. The alloys also assist in producing a bright silver appearance which becomes dull grey when exposed to the atmosphere. Hot Dipped Galvanising creates a proactive and self-repairing corrosion resistance; zinc reacts in the air and forms zinc carbonate (responsible for the dull grey in appearance), which protects the steel from corrosion.

Barton Class 4 conduit is routinely inspected for corrosion, strength and bending and is independently tested by an approved laboratory.

Handling and Storage

Galvanised conduit should be stored in dry conditions with good air circulation to prevent wet stain storage ("white rust"). However, should this occur it can be easily removed and does not affect corrosion resistance.

Binding materials used to make up bundles of conduit are not intended to be used when lifting this product, which should be handled only with approved slings.